Home   |  About Us   |  What's New   |  Products   |  Services   |  Support   |  Other Sites   |  Clients   |  Contact Us
 
Applied Data Sciences / AirTool II
Portable USB Weather Data Collection Unit

The AirTool II is an industrial, high precision, remote powered, hand held, pocket size weather data collection unit. It contains a barometer, thermometer and hygrometer. The unit can send real time, polled weather sensor data to a PC laptop or desktop computer via its USB port. The AirTool II is also an ultra low power device. The unit receives power via the USB cable and the laptop or desktop computer that is attached.

The AirTool II is rated for the industrial temperature range -40°C to +125°C (-40°F to 257°F)

NOTE: The AirTool II is not waterproof so it must be shielded from direct contact with water. The Microsoft Windows Operating System [2000/XP/XP(64)] software performs other calculations; such as air density, relative air density, density altitude, and etc.

The selling price is US $159.00 for the AirTool II, 1 meter USB cable and Windows software. The shipping cost is $9.00 USPS Priority mail excluding AK & HI.

We accept PayPal.
Contact Applied Data Sciences at (972) 620-8530 for online ordering questions.

Photographs of AirTool II  (3 photos)

Photograph of AirTool II Software

DEALER INQUIRIES WELCOME


To download the AirTool II Operating Manual, click here.

To search the current page for information, please use the box below.  Search help.

Features:
  • Barometer, Thermometer and Hygrometer.
  • Size is 2½" x 1½" x ¾".
  • Simple ASCII commands to poll AirTool II using programs such as Procomm or Hyperterminal
  • All data sent over the USB link is formatted and includes carriage returns and line feeds to make raw data legible on linked computers.
  • Windows supplied Software for viewing the AirTool II data on a PC.
  • Terminal software calculates many standard formulas.
    • Relative Air Density
    • Air Density
    • Density Altitude
    • Pressure Altitude
    • Oxygen Pressure
    • Saturated Water Vapor Pressure
    • Water Vapor Pressure
    • Dry Air Pressure
    • Dew Point Temperature
    • % Dry Air in Air
    • % Water Vapor in Air
  • Factory calibrated laser trimmed sensors.
  • Unit information can be polled by host PC.
  • Temperature & Hygrometer sensors located outside of the enclosure for faster response.
  • LED to indicate that unit is transmitting data.

Specifications:


Length:
2½ inches
Width:
1½ inches
Thickness:
¾ inch
Processor:
MicroChip PIC18F2553
Processor Speed:
48 MegaHertz
Program Memory:
16,384, 16-bit words (32K bytes)
Processor RAM:
2048 bytes
Processor EEPROM:
256 bytes
Processing Speed:
12 MIPS
Pressure Sensor:
Fujikura, ±2% FS Accuracy
-40°F to +257°F
Pressure Range:
4.44In/Hg to 34.05In/Hg
15KPa to 115KPa
Pressure Resolution:
0.001In/Hg
Temperature Sensor:
Microchip, Calibrated in °F, 2°F Accuracy
Temperature Range:
-40°F to 257ºF
Temperature Resolution:
0.1°F
Humidity Sensor:
Honeywell, ±2% Accuracy, -40°F to 185°F
Humidity Range:
0% RH to 100% RH
Humidity Resolution:
0.1%RH
Current Requirement:
100 milliAmps
Power Dissipation:
500 milliWatts
Air Density Calculation:
±0.1% in Pounds/Cubic Foot
Density Altitude Calculation:
±0.10% in Feet Above Sea Level

For additional information, please contact us at your convenience.  Copyright 2002-2008 Applied Data Sciences, Inc. All rights reserved. Updated May 2008. Applied Data Sciences assumes no responsibility for any errors which may appear in this document