Home   |  About Us   |  What's New   |  Products   |  Services   |  Support   |  Other Sites   |  Clients   |  Contact Us
 
Air Data Analyzer
Portable Environmental Air Quality Analyzer

The Air Data Analyzer is a high precision, battery powered, hand held air quality analyzer station. The basic unit contains a barometer, thermometer, hygrometer, time/date RTC and a battery level gauge.

Optional features available are:
  • Oxygen sensor
  • Carbon Dioxide sensor
  • Anemometer
  • Relay Closures
  • Battery Pack
The unit can transfer real time weather sensor data to a PDA or personal computer via an RS-232 (COM) port or an optional USB to RS232 Serial Adapter cable. The collected data can be saved and later transferred to the computer or PDA for display or analysis. It also has a datalogger feature which can store up to 16,000 samples of all the sensors and time/date in a 256K byte memory. The Air Data Analyzer is also an ultra low power device. Total power consumption with options is 700 mWatts. The unit is not waterproof so it must be protected from direct contact with water.
Retail price for the basic unit is US $399.00
Contact factory for pricing of the optional features
We accept PayPal.
Contact Applied Data Sciences for any promotional pricing.

Photographs of Air Data Analyzer
Photographs of Air Data Analyzer Software

DEALER INQUIRIES WELCOME

To download the Air Data Analyzer Operating Manual, click here.

To search the current page for information, please use the box below.  Search help.

Basic Features:
  • Barometer, Thermometer, Hygrometer, Time/Date RTC, and a battery fuel gauge.
  • 256K Byte datalogger memory for up to 16,000 samples of all sensors.
  • Comes with Air Data Analyzer Terminal Software for viewing the data collected with the Air Data Analyzer unit.
  • 24 key Keypad for data entry.
  • Formatted Data Output so that raw data can be read easily using a communications program such as Hyperterminal or Procomm.
  • User settable delay between samples from 1 minute to 2 hours.
  • Barometric pressure DC offset to use "real" numbers.
  • Time and Date set routine uses decimal numbers, and is settable from main screen.
  • Time and Date indicated on the log sample records.
  • Firmware revision indicated on the Unit Info Screen.
Optional Features:
Contact factory for pricing:
  • Oxygen Sensor
  • Carbon Dioxide Sensor
  • Hand Held Anemometer
  • Two Relay Closures for monitoring remote events
  • USB to RS232 Serial Adapter cable
  • Auxillary Battery Pack (12V @ 1.3AH uses two Velcro strips) .
    • AC/DC Battery Charger for Battery Pack.

Specifications:


Height:
8½ inches
Width:
3¼ inches and 4¼ inches at the head
Thickness:
1½ inches
Processor:
MicroChip PIC
Processor Speed:
4 MegaHertz
Program Memory:
8192, 14-bit words (14K bytes)
Processor RAM:
384 bytes
Processor EEPROM:
256 bytes
DataLogger EEPROM:
256K bytes
Processing Speed:
1 MIP
Display:
4 lines x 20 characters
Pressure Sensor:
±2.5% FS Accuracy
Pressure Range:
0 PSIA to 16 PSIA
Temperature Sensor:
Calibrated in °F, 1°F Accuracy
Temperature Range:
32º F to 212º F
Humidity Sensor:
±2% Accuracy, -40°F to 185°F
Humidity Range:
0% RH to 99% RH
(Option) Oxygen Sensor:
±1% of FS
Oxygen Range:
0% - 100%, 15 months expected life
(Option) Carbon Dioxide Sensor:
±40 ppm
Carbon Dioxide Range:
0 - 2000 ppm, 0 - 50ºC
(Option) Anemometer:
0 -5000 fpm
(Option) Relay Closures:
0 or 5VDC
(Option) Battery Pack:
12VDC @ 1.3AH
Voltage Requirement:
9 Volts DC
Battery Size Requirement:
Standard 9 Volt DC Alkaline
Current Requirement:
~140 milliAmps
Power Consumption:
~700 milliWatts
(Option) Power Source:
9 Volt, 200 mA, Wall Transformer
Real Time Clock:
Dallas DS1302 RTC
Clock Backup:
220 milliFarad super cap

For additional information, please contact us at your convenience.  Copyright 2001-2008 Applied Data Sciences, Inc. All rights reserved. Updated April 2008. Applied Data Sciences assumes no responsibility for any errors that may appear in this document.